PMT Audio
Rupert Neve Designs 551 Inductor EQ

Rupert Neve Designs

551 Inductor EQ

500 Series Module

From Rupert Neve Designs:

The 551 is the only equalizer for the 500 Series actually designed by Rupert Neve. Featuring 3 bands of EQ inspired by Mr. Neve’s most prized vintage designs, along with custom-wound inductors, transformers and class-A gain blocks, the 551 brings the thick, powerful lows and sweet highs of Rupert’s classics to the 500-Series format.

The 551’s 3-band, custom-tapped inductor EQ was inspired by our favorite elements of Rupert’s vintage EQ designs. The low frequency band is designed to produce a creamy, resonant bass response similar to a vintage 1064 – but unlike the vintage modules, the LF band on the 551 can be used as either a shelf or a peak filter, adding punch, dimension, and control to your low end.

The midrange band is based on that of the 1073, ideal for sweetening vocals and instruments while bringing them forward in a mix, and its proportional “Q” response makes it well-suited for minimizing problematic frequencies. The high frequency band is a hybrid vintage / modern design, blending inductor circuitry with capacitor-based topologies to achieve vintage tones with enhanced control. The High Pass filter is a 12dB/octave design with a fixed 80Hz frequency, and can be used in tandem with the low frequency EQ to add low-end presence without clouding the source material.

Specs

Noise, EQ bypassed (main output, un-weighted, 22Hz-22kHz, 40 Ohm balanced source)
Better than -102 dBV
Frequency response, EQ bypassed
Main output, no load: +/- 0.1 dBu from 20 Hz to 31.5 kHz, -1 dB @ 120 kHz
Maximum output level, EQ bypassed
23.25 dBu
THD+N, EQ bypassed
@ 1 kHz, +20 dBu output level, no load: Better than 0.0025%; @ 20 Hz, +20 dBu output level, no load: 0.13% Typical (2nd and 3rd harmonic)
High pass filter
-2.7 dB @ 80 Hz; Slope: 12 dB/Octave
Noise, EQ engaged (main output, un-weighted, 22 Hz - 22 kHz, 40 Ohm balanced source)
Better than -94 dBV
Frequency response, EQ engaged
Main output, no load: +/- 0.25 dBu from 20 Hz to 45 kHz, -2 dB @ 120 kHz
Maximum output level, EQ engaged
23 dBu
THD+N, EQ engaged
@ 1 kHz, +20 dBu output level, no load: Better than 0.009%; @ 20 Hz, +20 dBu output level, no load: 0.13% Typical (2nd and 3rd harmonic)
Power requirements
120mA on +16VDC, 110ma on -16VDC
Dimensions
1x 500 Series Module: 1.5” W x 5.9” D x 5.25” H (3.8 cm W x 15 cm D x 13.3 cm H)
Weight
1.5 lbs. (0.7 kg)

Source: Rupert Neve Designs 551 product page