
545 Primary Source Enhancer
500 Series Module
From Rupert Neve Designs:
Based around the circuitry in the acclaimed Portico 5045 – which has benefited countless tours, arenas, houses of worship and broadcast stages worldwide – the 545 is exceptionally useful at reducing feedback without negatively impacting the sonic integrity of the source.
The 545 shares some traits with conventional “noise gates”, but operates on a different principle. One common aspect is that both reduce the gain during the absence of signal – or more specifically, both begin to attenuate when the level of a signal falls below a certain user-defined threshold. The 545 senses when someone is speaking or singing into the mic and allows the signal to pass through, and senses when the person has stopped talking or singing and reduces the gain appropriately, thus reducing the system’s tendency to feed back.
Importantly, the 545 does not utilize filtering or digital processing to achieve its significant benefits. Built around Rupert Neve Designs’ custom input and output transformers, its all-analog circuitry provides superb control and sonic performance without compromising the integrity of the source material. This makes the 545 the most intuitive, natural-sounding and effective method of feedback reduction available on the market.
Specs
- Maximum input and output level
- +24 dBu
- THD+N
- 1 kHz, +20 dBu Output Level, no load: Better than 0.001%; 20 Hz, +20 dBu Output Level, no load: 0.1% typical (2nd and 3rd Harmonic)
- Noise (un-weighted, 22 Hz - 22 kHz, 40 Ohm balanced source)
- Primary Source Enhancer Bypassed: Better than -100 dBu
- Frequency response (30 ft. cable on main output)
- 30 Hz to 58 kHz: +/- 0.25 dB; 18.5 Hz: -3 dB
- Threshold
- Continuously variable from -18 dBu to +12 dBu
- Depth
- Continuously variable from 0 dB to -20 dB
- Time constants, RMS mode
- Attack & Release, Slow (FAST push-button OUT): 100 mS; Attack & Release, Fast (FAST push-button IN): 200 mS
- Time constants, peak mode
- Attack (fixed): 20 mS; Release, Slow (FAST push-button OUT): 1 S; Release, Fast (FAST push-button IN): 200 mS
- Power consumption
- +/-16 VDC @ 80 mA
- Dimensions
- 1x 500 Series Module: 1.5” W x 5.9” D x 5.25” H (3.8 cm W x 15 cm D x 13.3 cm H)
- Weight
- 1.5 lbs. (0.7 kg)
Source: Rupert Neve Designs 545 product page