LPR 35
Analog Tape
Specs
- Type
- Long play standard bias studio tape, same formulation as SM 911, backcoated
- Operating level
- up to +3dB
- Formats
- ¼” on 5” plastic Trident reel (270m), ¼” on 7” plastic Trident reel (549m), ¼” pancake 1100m (10"), ¼” on 10.5” plastic Trident reel (1100m), ¼” on 10.5” metal NAB reel (1100m)
- Tape widths
- 6.3 mm (¼ inch)
- Tolerances of tape width
- +0.0 /-0.06 mm (+0.0 /-2.4 mil)
- Base material
- Polyester
- Base thickness
- 20.0 μm (0.78 mil)
- Coating thickness
- 11.0 μm (0.43 mil)
- Total thickness
- 35.5 μm (1.40 mil)
- Matt back
- colour black
- Coercivity
- 25.5 kA/m (320 Oe)
- Retentivity
- 127 mT (1270 G)
- Saturation flux
- 1800 nWb/m
- Recommended bias setting
- 0.0 dB (7.5 ips, 70 µs), 0.0 dB (7.5 ips, 50+3180 µs), 0.0 dB (3.75 ips)
- Sensitivity drop for recommended bias setting
- ΔS10 4.0 dB (7.5 ips, 70 µs), ΔS10 4.0 dB (7.5 ips, 50+3180 µs), ΔS6.3 4.5 dB (3.75 ips)
- Maximum output level
- +7.5 dB at 1 kHz (7.5 ips, 70 µs), +7.5 dB at 1 kHz (7.5 ips, 50+3180 µs), +10.0 dB at 315 Hz (3.75 ips)
- Signal to bias noise at 1 kHz (MOL/BNIEC)
- 68.0 dB (7.5 ips, 70 µs), 71.0 dB (7.5 ips, 50+3180 µs), 67.5 dB (3.75 ips)
- Print-through
- 56.0 dB (all three)
- Leader tape
- No leader tape included
- Made in
- France
Source: RTM LPR35 technical data sheet (PDF)