
JDX 48
DI Box
From Radial Engineering:
The JDX 48™ is a direct box designed to capture the sound of an electric guitar amplifier by connecting between the amp head and the speaker cabinet, providing a balanced feed for the PA system that sounds like a well-placed microphone on your amp.
The JDX 48 makes it easy to get a consistent and natural amplifier tone through the PA system night after night, by taking a feed directly from your amplifier and employing Radial's popular JDX speaker emulation that produces an effect similar to placing a dynamic microphone in front of a 4x12 half stack cabinet. This gives you a more manageable sound onstage for gigs where feedback is an issue, or if mic'ing your amp isn't an option. For artists that employ in-ear monitoring systems, the JDX 48 provides consistent tone each night in the monitor mix for shorter setup times and a more comfortable audio feed for the artist.
The JDX 48 can be powered using 48V phantom from the mixing console, for a cleaner setup on stage that eliminates the need to carry a power supply to the gig. However, for times when phantom power may not be available, the JDX 48 also ships with a separate DC power supply - giving you a redundant powering option so you never have to perform without your JDX.
Specs
- Audio circuit type
- Discrete Class-A - Transformer Isolated
- Frequency response
- Shaped for guitar use
- Dynamic range
- 114dB
- Intermodulation distortion
- 0.03% (+10dBu input @ 1KHz)
- Input impedance
- 15kΩ
- Output impedance
- 2kΩ (XLR out)
- Noise floor
- -100dBu below 0dBu
- Maximum input
- 120W @ 8Ω
- Maximum output
- +14dBu (clip level)
- Features
- 180° polarity reverse, Ground lift
- Input connectors
- One 1/4" input
- Output connectors
- One XLR output, one 1/4" output
- Extras
- Bass extension lowers frequency response for bass guitar, 300W amp increases power handling from 100W to 300W, Active speaker emulation band-pass filter
- Construction
- 14-gauge steel chassis and outer shell
- Size (L x W x D)
- 6.25" x 5" x 2" (159 x 127 x 51mm)
- Weight
- 2.80lbs (1.28 kg)
- Power
- 48V phantom or +15VDC/400mA adapter Included
- Conditions
- For use in dry locations only between 5°C and 40°C
Source: Radial JDX 48 specifications page
