
TLM 67
From Neumann:
The TLM 67 captures the spirit of Neumann’s classic U 67, which defined the sound of the 1960s. But instead of electron tubes the TLM 67 relies on trouble free FET electronics with a special sound design for a gorgeous retro tone. Like its predecessor, the TLM 67 is a versatile studio workhorse with three polar patterns, pad and low cut options.
The TLM 67 shares many of the U 67’s key features, including its elegant shape and the famous tapered headgrille, which has since become iconic for the Neumann brand. What’s more, the TLM 67 uses the same large diaphragm capsule as its legendary predecessor, the classic K 67 capsule, also used in the Neumann U 87 A.
Instead of the U 67’s tube electronics, the TLM 67 has a transformerless head amplifier, built with highly reliable 21st century solid state technology – yet with a retro twist! The TLM 67’s circuit may be modern, but it meticulously reproduces the sound of the 1960s. This results in a seemingly low max SPL figure of 105 dB (in cardioid mode) for 0.5% THD, but, like in a tube circuit, distortion rises gently to 5% THD for 125 dB SPL. The TLM 67 thus captures the sound character and dynamic behavior of its famous predecessor without the use of tubes and without the inconvenience of a clunky PSU box and multipin cables.
Specs
- Operating principle
- Pressure gradient transducer
- Pattern
- Omni/cardioid/figure-8
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity (1 kHz into 1 kohm)
- 10/18/9 mV/Pa (Omni/cardioid/8)
- Output impedance (rated)
- 50 ohms
- Rated load impedance
- 1 kohms
- Self-noise, A-weighted
- 16/11/17 dB-A (Omni/cardioid/8)
- Self-noise, CCIR
- 29/24/30 dB (Omni/cardioid/8)
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 78/83/77 dB-A
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 65/70/64 dB
- Typical SPL, tube characteristic (K < 0.5%)
- 110/105/111 dB (Omni/cardioid/8)
- Typical SPL, tube characteristic (K < 5%)
- 130/125/131 dB (Omni/cardioid/8)
- Maximum output voltage
- -1 dBu
- Power (P48, IEC 61938)
- P48
- Current consumption (P48)
- 3 mA
- Connector
- XLR 3 F
- Diameter
- 56 mm
- Length
- 200 mm
- Weight
- 490 g
- Finish
- pearl grey/nickel
- Included
- TLM 67 Microphone, Wooden Box
Source: Neumann TLM 67 product page
