M 1030
From Microtech Gefell:
The studio condenser microphone M 1030 combines modern large diaphragm capsule technology with the latest in semiconductor circuit topology. The size of the microphone housing is optimized with regard to the expectations of a large diaphragm microphone for studio applications. The microphone is specifically designed to meet the needs of professional and semiprofessional users who demand the highest performance. The microphones are ideally suited for universal miking applications in broadcast and sound studios. Applications include vocalists, announcers, dialog pickup and as spot microphones for recording guitars, keyboard, percussion, wind and string instruments.
The electronic impedance converter uses a perfected circuit topology. This design reduces the noise floor to an extremely low level while also raising the maximum output capability. As a result, these microphones have a clean, distortion free sound over anextremely wide dynamic range. RFI susceptibility is very low.
Specs
- Type
- pressure gradient transducer
- Pattern
- cardioid
- Frequency response
- 20 Hz to 20.000 Hz
- Sensitivity at 1 kHz
- 21 mV/PA
- Output impedance
- 100 Ohm
- Self-noise (CCIR 468-4)
- 13 dB
- Self-noise (DIN EN 60268-4)
- 7 dB-A
- Signal-to-noise ratio (CCIR weighted)
- 81 dB
- Signal-to-noise ratio (A-weighted)
- 87 dB
- Maximum SPL (0.5% THD)
- 142 dB
- Maximum output level (RL = 1 kOhm)
- 17 dBu
- Maximum output level (RL = 10 kOhm)
- 18 dBu
- Dynamic range
- 135 dB
- Current consumption
- 3,6 mA
- Connector
- XLR3M
- Length
- 145 mm
- Diameter
- 66 mm
- Weight
- 355 g
- Finish
- satin nickel
- Included
- with the microphone holder MH 93.1 in a wooden case 250 mm x 175 mm x 110 mm
Source: Microtech Gefell M 1030 product page (English)