
N28
Ribbon Microphone
From AEA:
The AEA N28 delivers the velvety sound of classic ribbon mics - but with added mid range presence, precise stereo imagery, and truly impressive performance specs.
The AEA N28 is a compact active stereo ribbon microphone consisting of two matched bidirectional (or figure-of-8) ribbon transducers in a fixed Blumlein configuration. The N28 offers an effortless way to capture natural stereo, providing an authentic representation of a performance in its environment. Distinguishing itself from other AEA Stereo Ribbon Mics, the N28 is compact, maneuverable, and easy to use, making it ideal for a wide range of applications without the need for a multi-mic setup.
Whether for drum overheads, room ambience, or close-miked stringed instruments, the N28 delivers a phase-coherent, accurate response. Its mid-forward frequency response, tamed proximity effect, and quick transient response make it versatile across various sources. The N28 excels on darker sources and is a practical solution for capturing a stereo image without drawing attention to the mic itself.
Tightly match mic sensitivity and frequency response within .5 dB available for any pair of like mics except KU4s, KU5As, R88s & R88As.
Specs
- Type
- Pressure gradient transducer
- Pattern
- Two bidirectional in fixed Blumlein pair
- Frequency response
- <20 Hz to >20 kHz
- Sensitivity
- 6.10 mV/Pa (-44.3 dBV)
- Output impedance
- 92 Ω broadband
- Load impedance
- 1.0 kΩ or greater
- Maximum SPL
- 135 dB SPL at 1 kHz
- Power
- P48 phantom power, 7mA
- Polarity
- Pin 2 and 4 high for positive pressure at the front of the microphone
- Off-axis response, horizontal
- Level changes with angle, frequency response is consistent, -35dB null at 90º / 270º
- Off-axis response, vertical
- Level changes with angle, reduced HF response above and below 0º / 180º, -25 dB null at 90º / 270º
- Ribbon
- Aluminum corrugated ribbon, thickness 1.8 μm, width 0.086 in (2.2 mm), length 1.31 in (33.3 mm)
- Channel matching
- Precision matched within +/- 0.5 dB between channels
- Output transformers
- 1:89 Lehle output transformers
- Connector
- XLR-5M
- Dimensions
- Height 10.6 in (270 mm), width 1.62” (412 mm)
- Weight
- 14 oz (400 g)
- Included
- Storage/shipping case, custom windscreen, shock mount clip, soft cloth bag, 15-foot breakout cable, manual
Source: AEA N28 spec one-sheet (PDF), Technical Specifications